碳原子簇的结构与质谱的关联（Ⅱ）

根据出现在质谱中的各种大小的碳原子簇的相对丰度,分析了由激光产生的碳原子簇离子的统计分布,研究了这些统计分布与碳原子簇结构的关联。研究结果表明：相同构型的原子簇的相对丰度可以由同一条对数正态分布曲线来描述,由此能够获得碳原子簇构型的变化情况。质谱中分布曲线的数目对应于具有不同构型或不同结构稳定性的原子簇的数目。如果某些簇离子的谱峰明显地高出分布曲线,它们的结构应特别稳定,其成簇原子数就是所谓的“奇幻数”（ｍａｇｉｃｎｕｍｂｅｒ）,例如在石墨质谱中的Ｃ＿（６０）就属于这种情况。原子簇的统计分布还与它们的生成过程有关,由此可能揭示出原子簇的产生机理。     

Statistical replacement for systems with delta-correlated fluctuations

Nonlinear systems with stochastic parameters are approximated by simpler systems using a method that we call statistical replacement. This method is an extension of the previously developed AGREE which was restricted to systems with additive fluctuations. Statistical replacement incorporates the distinctions between globally stable thermodynamically closed systems and thermodynamically open systems that can be unstable.     

Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.     

Robust estimates of the theoretical standard deviation to be used in interlaboratory precision experiments

Interlaboratory experiments often contain results that strongly deviate from other results obtained in the same laboratory under repeatability conditions, or laboratory means that strongly deviate from other laboratory means. In ISO 5725-2 [1] and IUPAC [2], the basic standards for the organisation and analysis of interlaboratory experiments for the determination of precision of a measurement method, outlier tests are performed in order to detect such situations and to finally decide whether these values are retained in the analysis or discarded as outliers. This outlier treatment, which always has a subjective aspect, becomes unnecessary by using robust estimates of the repeatability and reproducibility standard deviation. This paper proposes to use Rousseeuw’s Q _n as an extremely robust and efficient estimate of the standard deviation. Two examples show the performance of the new method.     

Quality assurance and statistical control

In scientific research laboratories it is rarely possible to use quality assurance schemes, developed for large-scale analysis. Instead methods have been developed to control the quality of modest numbers of analytical results by relying on statistical control: Analysis of precision serves to detect analytical errors by comparing thea priori precision of the analytical results with the actual variability observed among replicates or duplicates. The method relies on the chi-square distribution to detect excess variability and is quite sensitive even for 5–10 results. Interference control serves to detect analytical bias by comparing results obtained by two different analytical methods, each relying on a different detection principle and therefore exhibiting different influence from matrix elements; only 5–10 sets of results are required to establish whether a regression line passes through the origo. Calibration control is an essential link in the traceability of results. Only one or two samples of pure solid or aqueous standards with accurately known content need to be analyzed. Verification is carried out by analyzing certified reference materials from BCR, NIST, or others; their limited accuracy of 5–10% make them less suitable for calibration purposes.     

Full Non-rigid Group of Sponge and Pina

The non-rigid molecule group theory (NRG) in which the dynamical symmetry operations are defined as physical operations is a new field in chemistry. Smeyers and Villa computed the r-NRG of the triple equivalent methyl rotation in pyramidal trimethylamine with inversion and proved that the r-NRG of this molecule is a group of order 648, containing a subgroup of order 324 without inversions (see J. Math. Chem. 28(4) (2000) 377–388). In this work, a computational method is described, by means of which it is possible to calculate the symmetry group of molecules. We study the full non-rigid group (f-NRG) of Sponge and Pina molecules with C ₂ and C _i point groups, respectively. It proved that these are groups of order 162 and 13122 with 54 and 3240 conjugacy classes, respectively. The character tables of these groups are also computed.     

活性炭负载纳米TiO2光催化降解性能研究

本文研究活性炭负载纳米TiO2的光催化降解性能和影响甲基橙废水处理的主要因素。结果表明:用溶胶-凝胶法制备的TiO2-活性炭催化剂具有比表面积大、分散性高、光催化降解性能好、可重复利用等优点;采用30W高硼紫外光灯,TiO2-活性炭光催化降解浓度为1500mg/L甲基橙废水的最优工艺条件是:催化剂活化温度为700℃、用量为1.0g/L、废水起始pH值为1、反应温度为45℃、光照时间为50m in。在此条件下,甲基橙和CODC r的去除率分别达99.8%和99.7%。     

纳米晶La_（1－_x）Sr_xFeO_3的合成及气敏特性的研究

用柠檬酸盐法合成出Ｌａ_（１－_ｘ）Ｓｒ_ｘＦｅＯ_３（ｘ＝０．１，０．２，０．３，０．４）原粉，再经固相反应得到纳米晶粉末，用ＴＧ、ＤＴＡ、ＸＲＤ、ＩＲ进行了表征，确证复合氧化物Ｌａ_（１－_ｘ）Ｓｒ_ｘＦｅＯ_３为钙钛矿型结构，粒径在１０～２５ｎｍ之间。实验结果表明，随着固相反应条件不同，产物粒径呈规律性变化．气敏特性研究表明，该纳米晶材料对乙醇有较高的选择性和灵敏度，其选择性顺序为Ｌａ_（０．９）Ｓｒ_（０．１）ＦｅＯ_３＞ＬａＦｅＯ_３＞ＬａＦｅＯ_３（大晶粒）。     

水杨醛缩氨基硫脲合钴(Ⅱ)的晶体结构及其荧光性质

在甲醇和DMF溶剂里,以Schiff碱水杨醛缩氨基硫脲(简写为HL)和六水二氯化钴合成了配合物[CoHL2].H2O.DMF.在配合物[CoHL2]中,钴(Ⅱ)原子具有扭曲的N2O2S2八面体配位构型,晶体通过分子间氢键作用形成二维的无限网状结构.红外光谱表明,配体在形成配合物后,νS=O,νC=O和νC=N红移.荧光光谱表明,配合物金属对配体n-π*激发引起的荧光发射峰有较大的影响.     

Modification of HPTLC-plates by in situ chemical bonding with non-polar and polar organosilanes

A method has been developed for the preparation of modified silica plates for high performance thin-layer chromatography (HPTLC). Some typical organosilanes were thus allowed to react in situ with the silica of Merck HPTLC-plates. This method was found to be highly reproducible, simple and cheap. Non-polar plates were prepared and compared with commercial plates from Merck, Whatman and Macherey-Nagel. Modification with cyanodecyltrichlorosilane resulted in plates that showed good coverage, efficiency and low residual silica activity. Silica modified with a multifunctional silane has different properties in different organic solvents. It will appear to be non-polar in a polar solvent and vice versa. New advantageous separation systems are thus made feasible by the presence of cyano groups on the plate. The utility of modified thin-layer plates is demonstrated by the separation of some homologues of p-hydroxybenzoic acid esters and of some polycyclic aromatic hydrocarbons.